Skip to content

ROS driver for all of MicroStrain's current G and C series products. To learn more visit

Notifications You must be signed in to change notification settings

LORD-MicroStrain/microstrain_inertial

 
 

Repository files navigation

Description

Interface (driver) software, including ROS node, for inertial sensors from MicroStrain by HBK, developed in Williston, VT.

Implemented using the MicroStrain Inertial Protocol SDK (mip_sdk)

Table of Contents

ROS Wiki

For more information on the data published and services available see our ROS wiki page

ROS vs ROS2 Versions

Note that this branch contains the ROS implementation for the packages. If you are looking for the ROS2 version, you should go to the ros2 branch

Packages

This repo contains the following packages:

Install Instructions

Buildfarm

As of v2.0.5 this package is being built and distributed by the ROS build farm. If you do not need to modify the source, it is recommended to install directly from the buildfarm by running the following commands where ROS_DISTRO is the version of ROS you are using such as noetic:

Driver:

sudo apt-get update && sudo apt-get install ros-ROS_DISTRO-microstrain-inertial-driver

RQT:

sudo apt-get update && sudo apt-get install ros-ROS_DISTRO-microstrain-inertial-rqt

For more information on the ROS distros and platforms we support, please see index.ros.org

Source

If you need to modify the source of this repository, or are running on a platform that we do not support, you can build from source by following the Building From Source guide below.

IMPORTANT NOTE ABOUT CLONING

This repo takes advantage of git submodules in order to share code between ROS versions. When cloning the repo, you should clone with the --recursive flag to get all of the submodules.

If you have already cloned the repo, you can checkout the submodules by running git submodule update --init --recursive from the project directory

The CMakeLists.txt will automatically checkout the submodule if it does not exist, but it will not keep it up to date. In order to keep up to date, every time you pull changes you should pull with the --recurse-submodules flag, or alternatively run git submodule update --recursive after you have pulled changes

Building from source

  1. Install ROS and create a workspace: Installing and Configuring Your ROS Environment

  2. Clone the repository into your workspace:

    git clone --recursive --branch ros https://github.com/LORD-MicroStrain/microstrain_inertial.git ~/your_workspace/src/microstrain_inertial
  3. Install rosdeps for this package: rosdep install --from-paths ~/your_workspace/src -i -r -y

  4. Build your workspace:

    cd ~/your_workspace
    catkin_make
    source ~/your_workspace/devel/setup.bash

    The source command will need to be run in each terminal prior to launching a ROS node.

Udev Rules

NOTE: If installing from the buildfarm, the udev rules will be installed automatically

This driver comes with udev rules that will create a symlink for all microstrain devices. To install the rules. Download the udev file from this repo and copy it to /etc/udev/rules.d/100-microstrain.rules

Once the udev rules are installed, the devices will appear as follows in the file system, where {serial} is the serial number of the device:

  • /dev/microstrain_main - Most recent non-GQ7 device, or the main port of a GQ7 connected. NOTE: Do not use this rule with multiple devices as it gets overridden with multiple devices.
  • /dev/microstrain_aux - Most recent GQ7 aux port connected. NOTE: Do not use this rule with multiple devices as it gets overridden with multiple devices.
  • /dev/microstrain_main_{serial} - All non-GQ7 devices, and the main port of GQ7 devices
  • /dev/microstrain_aux_{serial} - The aux port of GQ7 devices

Run Instructions

Launch the node and publish data

The following command will launch the driver. Keep in mind each instance needs to be run in a separate terminal.

roslaunch microstrain_inertial_driver microstrain.launch

The node has some optional launch parameters that can be specified from the command line in the format param:=value

  • namespace : namespace that the driver will run in. All services and publishers will be prepended with this, default: /
  • node_name : name of the driver, default: microstrain_inertial_driver
  • debug : output debug logs, default: false
  • params_file : path to a parameter file to override the default parameters stored in params.yml, default: empty

Publish data from two devices simultaneously

  1. Create the following files somewhere on your system (we will assume they are stored in the ~ directory):
    1. ~/sensor_a_params.yml with the contents:
      port: /dev/ttyACM0
    2. ~/sensor_b_params.yml with the contents:
      port: /dev/ttyACM1
  2. In two different terminals:
    roslaunch microstrain_inertial_driver microstrain.launch node_name:=sensor_a_node namespace:=sensor_a params_file:="~/sensor_a_params.yml"
    roslaunch microstrain_inertial_driver microstrain.launch node_name:=sensor_b_node namespace:=sensor_b params_file:="~/sensor_b_params.yml"

This will launch two nodes that publish data to different namespaces:

  • /sensor_a, connected over port: /dev/ttyACM0
  • /sensor_b, connected over port: /dev/ttyACM1

An example subscriber node can be found in the MicroStrain Examples package.

Docker Development

VSCode

The easiest way to develop in docker while still using an IDE is to use VSCode. Follow the steps below to develop on this repo in a docker container.

  1. Install the following dependencies:
    1. VSCode
    2. Docker
  2. Open VSCode and install the following plugins:
    1. VSCode Remote Containers plugin
  3. Open this directory in a container:
    1. Open the microstrain_inertial directory in VSCode
    2. Click the green >< icon in the bottom left corner of the window
    3. Choose Reopen In Container
  4. Once the project is open in the container, it will take some time to automatically install the rosdeps inside the container, you can then build and run the container by following step 4 of Building from source

Make

If you are comfortable working from the command line, or want to produce your own runtime images, the Makefile in the .devcontainer directory can be used to build docker images, run a shell inside the docker images and produce a runtime image. Follow the steps below to setup your environment to use the Makefile

  1. Install the following dependencies:
    1. Make
    2. Docker
    3. qemu-user-static (only for multiarch builds)
      1. Run the following command to register the qemu binaries with docker: docker run --rm --privileged multiarch/qemu-user-static:register

The Makefile exposes the following tasks. They can all be run from the .devcontainer directory:

  • make build-shell - Builds the development docker image and starts a shell session in the image allowing the user to develop and build the ROS project using common commands such as catkin_make
  • make image - Builds the runtime image that contains only the required dependencies and the ROS node.
  • make clean - Cleans up after the above two tasks

Shared codebases

Both the ros and ros2 branches share most of their code by using git submodules. The following submodules contain most of the actual implementations:

Previous Versions

Previous versions of the driver were released as tags on Github. They can also be found in specific branches:

  • ros-3.x.x contains the most recent code before the standardizing refactor
  • ros-2.x.x contains the most recent code before the MIP SDK refactor
  • master contains the most recent code before the common codebase refactor (prior to 2.0.0)

License

Different packages in this repo are released under different licenses. For more information, see the LICENSE files in each of the package directories.

Here is a quick overview of the licenses used in each package:

Package License
microstrain_inertial_driver MIT
microstrain_inertial_msgs MIT
microstrain_inertial_rqt BSD
microstrain_inertial_examples MIT