Skip to content

This is a series of GPU optimization topics. Here we will introduce how to optimize the CUDA kernel in detail. I will introduce several basic kernel optimizations, including: elementwise, reduce, sgemv, sgemm, etc. The performance of these kernels is basically at or near the theoretical limit.

License

Notifications You must be signed in to change notification settings

Liu-xiandong/How_to_optimize_in_GPU

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

58 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

How to optimize in GPU

This is a series of GPU optimization topics. Here we will introduce how to optimize the program on the GPU in detail. Here, I will introduce several basic kernel optimizations, including: elementwise, reduce, sgemv, sgemm, etc. All the following performance data are run on V100 and tested by nsight.

If you have any questions, you can directly contact: xiandong_liu@foxmail.com

1. elementwise

For elementwise kernel, the optimization techniques that can be used are mainly vectorized memory access. I compared the three memory access methods of float, float2, and float4. The performance is as follows:

Type Bandwiths Ratio
float 827 91.9%
float2 838 93.1%
float4 844 93.8%

2. reduce

Seven optimization methods were used to optimize reduce operator, and the performance of different optimization methods was tested on V100. The bandwidth of 858GB/s is obtained, and the bandwidth utilization rate is: 858/900=95.3%. The figure below shows the performance of the 7 optimization techniques.

3. sgemv

The core of sgemv kernel optimization lies in the design of blocks and threads, and it is necessary to avoid the situation of thread idle as much as possible.

There are different optimization techniques for different data shapes. I designed 3 different optimization methods for 3 different situations, namely: n=32, n<32, and n>32. The corresponding performance is as follows:

sgemv M N my_sgemv time(ns) cublas(ns) my_sgemv/cublas
v0 16384 32 10341 8386 81.1%
v1 16384 128 14284 15848 110.9%
v2 16384 16 6903 7576 109.7%

4. sgemm

The optimization of sgemm is divided into two levels, namely CUDA C-level optimization and optimization of SASS code.

Regarding CUDA C-level optimizations, the final code is sgemm_v3. On a large matrix of 4096 (M=N=K), our sgemm can achieve 96.8% performance of cublas, with a peak floating point efficiency of 93.6%, basically reaching the limit of CUDA C code optimization. The figure below shows the performance of sgemm_v3.

Regarding the optimization of SASS code, CuAssembler is used for tuning. There are two main optimization techniques in this part, namely register remapping and instruction rearrangement to obtain better .reuse flag layout.

License

All the source codes of this repo are released under Apache 2.0.

About

This is a series of GPU optimization topics. Here we will introduce how to optimize the CUDA kernel in detail. I will introduce several basic kernel optimizations, including: elementwise, reduce, sgemv, sgemm, etc. The performance of these kernels is basically at or near the theoretical limit.

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published