This repository contains open hardware design files for an adapter board supporting the Allied Vision Alvium CSI-2 camera pinout to Wandboards i.MX6 based devices, created by Allied Vision. The board allows the user to interface with one Alvium MIPI CSI-2 compatible camera over a Flexible Flat Cable (FFC) connector.
This adapter can also be ordered at Allied Vision or a qualified Allied Vision distributor under order code 12362 - Adapter Board CSI-2 Wandboard.
These instructions will get you a copy of the design files to make your own adapter boards for development and testing purposes. The board can be produced and assembled using the provided design files. Please take a look at the mechanical layers for more information regarding the PCB stackup recommended for fabrication.
See our website for further documentation and installation guides of the finished boards.
- A running installation of Altium.
- A PCB producer & PCBA manufacturer or some soldering skills.
- One supported embedded board Wandboard i.MX6 series, revision D:
- Wandboard Solo (i.MX6) WB-IMX6S-BW
- Wandboard Dual (i.MX6) WB-IMX6U-BW
- Wandboard Quad (i.MX6) WB-IMX6Q-BW
- Wandboard QuadPlus (i.MX6) WB-IMX6QP-BW
- One supported MIPI CSI-2 FPC cable
- Allied Vision part numbers #12316, 12317, 12318
- One Allied Vision Alvium CSI-2 camera
Open the CSI2-WAND_Rev01.PrjPcb project file in your Altium environment.
This project is licensed under the MIT License - see the LICENSE file for details